rondo worldwide

Stay connected with Rondo

Rondo Estimation Wizard

Step: {{ step }} of {{ steps }}

Please select Rondo System

Rondo System selected:

{{ productDisplay.label }}

Please select suspension method

Please select ceiling grid module

Suspension method

Fully Suspended

Ceiling grid module

Studs 1200 x 1200, Furring Channels at 600 centres

Please select Cross Tee Length.

Please select Cross Tee spacing.

Please select Main Tee Spans.

Please select Stud spacing.

Please select Furring Channel spacing.

Please enter Wall height (mm)

mm

Please enter the area (m2) of your ceiling

m2
Rondo System: {{ productDisplay.label }}
Suspension method: {{ method }}
Top Cross Rail spacing: Ceiling grid module: Fully Suspended {{ tcr_spacing }}
Furring Channel spacing: Studs 1200 x 1200, Furring Channels at 600 centres {{ furring }}mm
Wall height (mm)
Length (lm) of your wall: Area (m2) of your ceiling:
Cross Tee Length: {{ xp_ctl }}mm
Cross Tee spacing: {{ xp_cts }}mm
Main Tee Spans: {{ xp_mts }}mm

Results

Product Description Quantity Nearest sub pack quantity
Part: {{ res.name }} Description: {{res.desc}} Quantity: {{ res.q }} Nearest sub pack quantity {{ isNaN(res.sub) ? "-" : res.sub }}
Product Description Quantity Nearest sub pack quantity
Part: {{ res.name }} Description: {{res.desc}} Quantity: {{ res.q }} Nearest sub pack quantity {{ isNaN(res.sub) ? "-" : res.sub }}

Notes

  1. Based on suspension points @ 1200mm centres - Suspension drop based on 600mm
  2. Quantities to be used as an approximate guide only and calculations are based on a square area.
  3. Quantities may vary, wall angle in particular, depending on factors such as layout of ceiling plan, noggings for light fittings & air registers, wastage, damage etc.
  4. Quantities to be used as an approximate guide only and calculations are based on a square area.
  1. Noggings required only as specified.
  2. Quantities an approximate guide only and based on a straight run of wall. Further allowance should be made for intersecting walls, framing around window/door openings and wastage.
  1. Quantities an approximate guide only and based on a straight run of wall. Further allowance should be made for intersecting walls, framing around window/door openings and wastage.

Request a quote

Your Distributor: {{ supplier.selected.name }} - {{ supplier.selected.address }} - {{ supplier.selected.postcode }}

Choose one of the nearest distributors


Please note: If your country is not listed we don't service your region.


Whilst every care has been taken in the preparation of Rondo Wizards, products and systems do change over time, and interpretations may vary, which means Rondo Building Services Pty Ltd cannot accept liability for the accuracy of information supplied (or lack thereof), or any consequences which happen as a result. Rondo Wizards are intended as a guide only and do not replace professional judgement. Installation of Rondo products must also be in accordance with the Rondo Professional Design Manual which is also available on the Rondo website.